Ionospheric F2-Layer critical frequency retrieved from COSMIC radio occultation: A statistical comparison with measurements from a meridional ionosonde chain over Southeast Asia

In this paper, we compared the F2-Layer critical frequency (foF2) derived from FORMOSAT-3/COSMIC radio occultation (RO) and ionosondes at Chiang Mai, Chumphon and Kototabang during the years 2008–2015 to evaluate the performance of COSMIC RO over Southeast Asia region. The results show that the time development of foF2 values derived from COSMIC RO generally agrees well with those from ionosonde measurements. However, the differences between the foF2 derived from COSMIC RO and that derived from ionosonde observations display latitudinal dependence. COSMIC RO tends to underestimate foF2 at Chiang Mai and Kototabang, which is near to the north EIA crest and the south one, respectively, while a little overestimate foF2 at Chumphon, which is close to the geomagnetic equator. COSMIC RO agrees best with ionosonde at Chumphon and worst at Chiang Mai. At each ionosonde station, the quality of COSMIC RO data degrades with the increase of solar activity. In addition, at the station Chiang Mai and Kototabang, COSMIC RO performs better in summer than in equinox and winter. Furthermore, the differences in foF2 derived from COSMIC RO and that from ionosonde measurements vary with local time, i.e., the differences in foF2 are generally smaller at night and larger in noontime when equatorial ionization anomaly (EIA) is well developed.     

高温声表面波器件Pt电极的制备研究*

针对高温声表面波(SAW)器件中的Pt电极制备需求,采用电感耦合等离子体干法刻蚀工艺实现Pt电极的干法刻蚀。通过采用纯Ar气源,研究不同ICP功率/RF功率下Pt电极的刻蚀,采用优化的刻蚀参数实现SAW中Pt叉指电极的制备。针对Pt溅射刻蚀中出现的再沉积问题,分析沉积物对电极制备的影响,通过后处理实现沉积物的去除,实现高温SAW器件的制备。     

Effects of in-track maneuver on Sun illumination conditions of near-circular low Earth orbits

By developing approximate analytical models considering the J₂ perturbation, the effects of an in-track maneuver on the orbital Sun illumination conditions of near-circular low Earth orbits are analyzed. First, two approximate models for the variations in orbital sunshine angles are developed, one for variations at a given time and the other for variations at a given argument of latitude. Next, two approximate models for variations in orbital arc in Earth shadow are developed, one considers the small eccentricity and the other uses the zero eccentricity. Finally, the developed approximate models are applied to analyzing the Sun illumination conditions of a typical in-track maneuver mission on a near-circular low Earth orbit. From the results obtained, three major conclusions can be drawn. First, the variations in orbital sunshine angles at a given time may reach tens of degrees when the drifting time reaches hundreds of orbital periods, and the approximate model for that situation cannot effectively approach the numerical results. Second, the variations in orbital sunshine angles for any given argument of latitude are only a couple of degrees even when the drifting time reaches 500 orbital periods, and the approximation model developed can effectively approach the numerical results. Third, for variations in orbital arc in Earth shadow, the approximate model considering the small eccentricity has simple expressions and can effectively approach the numerical results; in contrast, the approximate model using the zero eccentricity has relatively worse precision.     

邻苯二甲腈基联苯型酚醛树脂的制备与性能

以碱为催化剂,通过联苯型酚醛树脂与4-硝基邻苯二甲腈之间的亲核取代反应,制备了邻苯二甲腈基联苯型酚醛树脂(PBN).流变性能测试结果表明,PBN树脂在180 ～ 300℃,黏度＜400 mPa·s,表明该树脂具有优良的加工性能.DSC测试结果表明,PBN树脂的固化温度为280～450℃,固化反应峰值温度为377℃,固化放热约为187 J/g.该树脂表现出优良的耐热性,其储能模量起始下降温度高于450℃,Td5约为529℃,氮气氛围、900℃残碳率约为78％.     

圆锥脉冲等离子体诱导流场特性分析

对等离子体诱导流场特性进行研究,有利于解决双稳态非对称分离涡带来的连续比例控制困难的问题。在封闭光学玻璃箱体内,应用介质阻挡放电等离子体对20°顶角圆锥附近静止大气进行了定常和脉冲循环控制,对等离子体诱导的圆锥截面绕流速度场进行了二维PIV测量,对定常控制和脉冲循环控制下最大绕流速度及最大轴向涡量进行了比较分析。实验结果表明：相对于定常控制模式,脉冲循环控制下沿垂直于圆锥截面对称面径线分布的时间平均切向速度和轴向涡量范围较广;在脉冲循环控制下,动量传递的主要表现在离散涡的形成而不是气流的加速。     

首次交会对接任务发射场加注安全保障改进

载人航天器加注是航天器研制过程中安全风险最高、危险作业工序最多的环节,必须采取严密的安全防护措施,确保万无一失.通过实践探索积累经验,全面周密的设计论证,对原有加注硬件条件进行改造,工作流程进行优化,从而大幅提高本质安全度,并在首次交会对接任务中加以应用和验证,取得了良好的效果,圆满完成了“天宫一号”、“神舟八号”发射...     

SAR二维锯齿波调频干扰研究

分析线性调频信号加入锯齿波调频干扰的频谱特点和干扰效果,发现锯齿波调频干扰有产生虚假目标多、功耗低的特点,且在二维干扰的情况下能产生大面积多虚假目标,有效地对真实目标进行遮盖。并且分析了调制参数变化对干扰效果的影响,利用仿真实验验证了理论的正确性。     

基于合成特征参数的雷达信号聚类分析

针对截获的雷达辐射源脉冲数据提出了一种基于特征参数合成的聚类算法。算法利用全脉冲数据的特征参数,通过对每一个特征参数的分选计算出该参数的加权系数。通过加权系数对每一个特征参数的加权得到合成的特征参数,并利用合成参数对脉冲进行聚类。仿真试验表明该算法能够实现对信号的聚类分选,采用编码的方式有利于降低噪声的影响。     

TiAl/IN718合金过渡液相连接

采用过渡液相TLP(Transient Liquid Phase)连接技术,以金属Ti,Cu,Ni箔构成复合焊料连接TiAl和IN718合金.研究了保温时间对接头界面结构的影响.实验结果表明:采用Ti-Cu,Ti-Ni复合焊料可以制备无缺陷的接头,但2种焊料形成液相的过程和机理不同.由于在等温凝固过程中,从IN718合金中扩散过来的合金元素可在焊缝区聚集,从而在接头中形成亚层结构.通过对接头焊缝区的组织分析和硬度测试表明,在实验条件下Ti-Ni焊料的等温凝固过程持续时间比Ti-Cu的短.     

加强企业质量管理体系内部审核的思考

概述在企业质量管理体系建设过程中,内部质量审核的作用,分析内部审核过程中存在的问题,对内部审核工作进行了思考,提出进一步加强人员培训、审核策划、角色定位、工作落实的建议.